[Chrysler300] Limited Slip or not?

["John spiers@xxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

All:

I am trying to figure out if a 1964 300 Sport sedan parts car I purchased recently has a limited-slip differential.

As I've done in the past to check other cars, I jacked up the rear with both tires off the ground and then rotated one rear tire.

I expected the other tire to turn - the same way for a limited-slip, the opposite way for an open diff.

Rotating one wheel, the other tire did not rotate -  so I went over to the other side and rotated it. Nothing from the opposite tire either!

There is no driveshaft - could that be the issue?

As it is, the driver's side tire rotated with some effort.  The passenger side had little resistance.

If I find the build sheet, where would the Sure-Grip notation be?  The body tag is missing.

Thanks for helping to solve this minor mystery.

John Spiers

A 300D and a couple of 300Ks in Florida

__._,_.___

---

Posted by: John <spiers@xxxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___