{Chrysler 300} 1964 colling fan

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hello All,

 

The factory fan and clutch was not on my recent 300K purchase. It had been converted to a non AC set up. This car has AC.

 

Has anyone used the following fan: https://www.summitracing.com/parts/GMK-4012312681

 

The factory service manual shows a 7 blade 18 inch fan. This is a 7 blade 18 inch fan. I have seen the write ups on the club website on the clutches. Although they are some years back, I will see if the newer parts numbers are still good and will match this fan.

 

I will later go hunting for a used factory fan.

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61717C08C14817E80B80E8D093239%40CY5PR19MB6171.namprd19.prod.outlook.com.