{Chrysler 300} 1962 Autolite Distributor Tech Manual

[Kurt Brueske <kurt.brueske@xxxxxxxxx>]

Hello fellow 300ers -

Does anyone happen to have a detailed manual for the 1962 Autolite Dual Point Distributor - either a web reference or PDF file?

I’m trying to start my 300H after an 18 month slumber and don’t appear to be getting spark - Fig. 80 of the Service Manual isn’t detailed enough/too small to read.

I checked coil low/high voltage circuits using a multimeter and resistance (ohms) is within spec so I think the coil is good.  I pulled a spark plug and got no arcing when attempting to turn over.  I took off the distributor cap for a look and everything appears in order with the exception of a stud that has a wire from one set of points attached, continuing through a casing hole where it has a wire secured with a 3/16 nut and wire that connects to the negative terminal of the coil.  This stud and nut were somewhat loose.  There is a wire leading from the positive terminal on the coil to the condenser which I believe is for radio static supression.

Appreciate any/all help!

Kurt

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/f09ad1d9-1682-4118-bdbf-4da2d0f611abn%40googlegroups.com.