Re: {Chrysler 300} 1962 Inline Transmission Filter

[Marshall Larson <granitledge@xxxxxxxxx>]

I don't believe there is a need for a filter beyond that already in place. The normal wear, very fine particles of clutch material, settle in the bottom of the pan and do not circulate with the fluid. If you are concerned about ferrous metal pieces, you can place one or more strong magnets on the outside of the pan that will catch and hold them. Of course, if the magnets are needed then you will likely be rebuilding your transmission soon.

On Sat, Feb 1, 2025 at 1:53 PM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Does anyone produce the inline Transmission Filter that lives within the Transmission Oil Cooler Line?

And I mean the factory style with the threads at either end.

Thanks

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/7C100B60-49C5-4733-B89E-B0D3B8643C88%40yahoo.com.

--

Marshall Larson

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNSYDBotpRP0hLSjkYJJo%3DGOQEkWG6g5V46XcB0aP-r5Mg%40mail.gmail.com.