RE: Head milling. (Head Gaskets)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Head milling. (Head Gaskets)



===========================================================
Empower your Team with Remote Access. GoToMyPC Pro 
provides your organization with instant remote access to 
email,files, applications and network resources in real 
time. FREE TRIAL:
caaccMSb7yoMza/ ExpertCity
===========================================================

Hi Don,
I am getting ready to put together a 440 and I'm using the Felpro Blue
head gaskets that you mentioned.  Are they supposed to be assembled dry
or should I coat them with something like the Permatex copper spray
gasket seal stuff.
Regards,
Ken 

-----Original Message-----
From: Don Dulmage [mailto:big-d@xxxxxxxxxxxx] 
Sent: Sunday, May 02, 2004 9:34 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Head milling.

Chrysler makes especially thier BB block heads generoulsy thick.
Unfortunately that also makes them big on combustion chamber volume and
low on compression. Add to that that most of us use Felpro Blue head
gaskets (The worlds best) and they are .020+ " thicker than the stock
head gaskets which were .019" to .021"  depending on source we are
giving away gobs of compression.  Compression is good for HP. 
Anyway that is the scoop.
Don 

===========================================================
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caaccMPb7yoMzf/ UOP
===========================================================



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 










Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.