Re: Now wait just a durn minute!!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Now wait just a durn minute!!!
- From: Dave Casey <dcasey@xxxxxxxxxxxxx>
- Date: Wed, 16 Jun 2004 22:44:32 -0500
-----------------------------------------------------------
Give Your Team Access to Their PCs from Anywhere. Increase
productivity with a secure remote-access solution from
GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
caaciqXb7yoMza/ExpertCity
-----------------------------------------------------------
Should be bolt on with only some drilling at most.
Dave Casey
----- Original Message -----
From: "Sean" <pobolt@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, June 16, 2004 9:24 AM
Subject: Re: Now wait just a durn minute!!!
> -----------------------------------------------------------
> Let University of Phoenix make 2004 your year. Evening,
> weekend or FlexNet® classes - over 130 locations. Look
> into our programs and get the degree that gets you going!
> caaciq1bUYx2xa/UOP
> -----------------------------------------------------------
>
>
>
>
>
> Nope, no swaybar. If I get one aftermarket, how would it attach? Is
there any cutting, drilling, welding, etc.? Thanks,
>
> Sean Bolter
> ----- Original Message -----
> From: Dave Casey
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Tuesday, June 15, 2004 11:49 PM
> Subject: Re: Now wait just a durn minute!!!
>
>
> -----------------------------------------------------------
> Give Your Team Access to Their PCs from Anywhere. Increase
> productivity with a secure remote-access solution from
> GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
> caaciqXb7JXu0a/ExpertCity
> -----------------------------------------------------------
>
> Yes. Does your car even have a front sway bar on it?
>
> Dave Casey
>
> ----- Original Message -----
> From: "Sean" <pobolt@xxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, June 15, 2004 10:38 PM
> Subject: Re: Now wait just a durn minute!!!
>
>
> > [AD removed for archives]
> > -------------------------------------------------------------------
> > Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
> > FREE Cutlery Set + Cutting Board!
> > caaclxSbUYx2xa/OmahaSteaks
> > -------------------------------------------------------------------
> >
> >
> > That's fascinating. I am about to rebuild the front end. A question,
> though. Could it lean like that with torsion bars that are still
strong?
> If I have to replace them, I'd like to do it when I tear the control
arms
> out.
> >
> > Thanks,
> >
> > Sean
> > ----- Original Message -----
> > From: Don Hudson
> > To: 1962to1965mopars@xxxxxxxxxx
> > Sent: Tuesday, June 15, 2004 11:01 PM
> > Subject: Re: Now wait just a durn minute!!!
> >
> >
> > -----------------------------------------------------------
> > Give Your Team Access to Their PCs from Anywhere. Increase
> > productivity with a secure remote-access solution from
> > GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
> > caaciqXb7JXu0a/ExpertCity
> > -----------------------------------------------------------
> >
> > Sounds like you might need a sway bar and possibly new upper/lower
> control
> > arm bushings.
> > Don
> >
> >
> > > I have a 1964 Fury with the Poly, and was thinking just like
you.
> It
> > has great ride height, and the two motors are about 50-60 pounds
> different.
> > What puzzles me, though, is that even now with the Poly she leans
like a
> > sailboat on turns. The car has 116,000 miles (real? who knows?). I
am
> > GUESSING that it would be a good idea to update it to brand-new, HP
big
> > block bars. But I don't know.
> >
> > -----------------------------------------------------------
> > Empower your Team with Remote Access. GoToMyPC Pro
> > provides your organization with instant remote access to
> > email,files, applications and network resources in real
> > time. FREE TRIAL:
> > caaciqTb7JXu0f/ExpertCity
> > -----------------------------------------------------------
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one
person --
> directly to that person. I.e., send parts/car transactions and
negotiations
> as well as other personal messages only to the intended recipient, not
to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to
Mopar
> topic. Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> > -----------------------------------------------------------
> > Let University of Phoenix make 2004 your year. Evening,
> > weekend or FlexNet® classes - over 130 locations. Look
> > into our programs and get the degree that gets you going!
> > caaciq1bUYx2xf/UOP
> > -----------------------------------------------------------
> >
> >
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --
> directly to that person. I.e., send parts/car transactions and
negotiations
> as well as other personal messages only to the intended recipient, not
to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to
Mopar
> topic. Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
>
> -----------------------------------------------------------
> Empower your Team with Remote Access. GoToMyPC Pro
> provides your organization with instant remote access to
> email,files, applications and network resources in real
> time. FREE TRIAL:
> caaciqTb7JXu0f/ExpertCity
> -----------------------------------------------------------
>
>
> ----
> Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
>
> [Non-text portions of this message have been removed]
>
> -----------------------------------------------------------
> Empower your Team with Remote Access. GoToMyPC Pro
> provides your organization with instant remote access to
> email,files, applications and network resources in real
> time. FREE TRIAL:
> caaciqTbUYx2xf/ExpertCity
> -----------------------------------------------------------
>
>
> ----
> Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
-----------------------------------------------------------
Let University of Phoenix make 2004 your year. Evening,
weekend or FlexNet® classes ? over 130 locations. Look
into our programs and get the degree that gets you going!
caaciq1b7yoMzf/UOP
-----------------------------------------------------------
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
b7yoMz.
Back to the Home of the Forward Look Network