RE: 1964 Dodge

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYb7yoMza/TopOffers
==========================================================
Frank,
My clutch fan measures 2.5" tall from the edge of the large clutch to 
the point at which it fits onto the water pump.  New units I tried 
measured anywhere from 3.25" to 3.5" tall and were too long to fit my 
car.  I had my clutch rebuilt by Fred Oliva down in Florida.  He 
occasionally has ads in the Mopar magazines.  His rebuild was excellent. 
 I believe the cost was around $210 with the shipping.   Another option 
might be to use a 7 blade non-clutch fan.  I bought one on eBay for 
around $15 and used it until Fred rebuilt mine...Brian
   
fcapretti@xxxxxxx wrote:
> 
> Can anyone let me know where I can buy a new clutch fan for my 1964 
> Dodge Polara with a 383 and factory AC. I ordered one at NAPA but the  
> shaft is much longer then mine. about 21/2 inches and mine is almost 
> flush with the mounting bracket. The other problem I am having is 
> getting the rear power window motor out , the window is in the up 
> postion and doses not move and I can not get the last screw out without 
> moving the window down. How can I get it down if the motor will not 
> work? 
> Thanks Frank



'64 Belvedere
Woodstock, IL.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.