Re: 361 engine modifications
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 361 engine modifications



[AD removed for archives]
-------------------------------------------------------------------
Are you serious about buying a NEW car or truck soon? Research before stepping on the car lot and save THOUSANDS!
Get NO OBLIGATION price quotes from car dealers in your area.
caacOlPb7yoMza/LeadClick
-------------------------------------------------------------------


I think '66 was the last year for the 361 in cars.

Dave Casey

----- Original Message ----- From: <lxpg1@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, November 15, 2004 3:30 PM
Subject: Re: 361 engine modifications



[AD removed for archives]
-------------------------------------------------------------------
Claim your tickets to Universal Orlando now
caacQ4KbUYx2xa/PermissionData
-------------------------------------------------------------------


In a message dated 11/15/2004 3:20:14 PM Eastern Standard Time, kirkv76@xxxxxxxxxxx writes: I may be coming into possession of a 361 engine. NOw I know that this was the predecessor to the 383 but that is all I know. Is this an engine that has much capacity for twekeing some extra horsepower out of it? Is there much in the way of aftermarket stuff that could make the use of this engine viable for say a sleeper street rod project or something? Any ideas other than get another engine, would be greatly appreciated.

Kirk

The 361 is the same as the Chrysler 350, 383, and 400. All motors are low
deck big block Mopars. The 361 is a good economical motor with a two barrel
motor. Some 361 motors were equipted with the long ram cross induction. I believe
they were known as Sonoramic Comando engines. I could be wrong about that,
but I have seen the 361 with the long ram setup. The 361 will take the same cam
and heads as all the big block mopars with the exception of Max Wedge and of
course Hemi. Depending on the year and application of the motor you could have
adecent power plant to start with.361 engines were made up into the 1970's for
truck applications. The car engines dissapeared in 64, 65? Not sure which
year. You can toss in a fairly good cam. I would maybe use a Mopar Purple shaft
cam. Something less than the 484 that is so popular. Put on a set of 516
closed chambered heads and you will jerk up your compression a bit. Any after
market Big block (low deck) manifold will work. An Edelbrock 383 is a good choice.
Toss on an Eddelbrock 650 or 625 4 bbl carb and she will have lots of power.
You wont be winning any races at the track but it will have considerable power
for the street. The thing that holds the 361 back is the small pistons. Add
that to the fact that no one has oversized slugs on the shelf and you quickly
find out the engines limitations.
Bob


[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacOlIbUYx2xf/MyDietPatches
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.



[AD removed for archives] ------------------------------------------------------------------- Claim your fully stuffed Christmas Stocking now caacQ4Sb7yoMzf/PermissionData -------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


b7yoMz. 







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.