RE: Tuning issues

[ledman_70@xxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Get both the PlayStation2 and Game Cube for Free! Click here to 
find out how.
caadlVCbOyW3Na/Consumer Research
-------------------------------------------------------------------

I don't have the cam specs, it was used. Where do you hook the vaccum 
guage....carb base? What should it read? It's a 4-spd, so no reading in 
gear. What kind of compression boost are you talking about?
Jeff
lewtot184@xxxxxxx wrote:
> 
> 
> first, it that's a "509" hydraulic its too much cam. bid hydraulic cams 
> are  
> torque killers. they need a compression boost to help them out. tell us 
> the  
> complete spec's on the cam.  the best thing to do is get a vacuum 
> reading  at 
> idle and in gear. you'll need to change the power valve to something 
> like a  
> 4.5 or lower. recurve the distributor to bring the centrifugal advance 
> it  
> quicker.
> 
> [Non-text portions of this message have been removed]
> 



Jeff Adams
64 Polara

[AD removed for archives]
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
caadlVDbOyW3Nf/ProductTestPanel 
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.