Thread pitch and diameter of water temp sending unit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Thread pitch and diameter of water temp sending unit





The hole for the water temp unit in the aluminum water pump housing I bought for my '62 413 is much too small, so I'm going to have to drill and tap a larger one.  Can someone please tell me the diameter and thread pitch of the early B/RB temp sending unit?  I'm guessing 1/4-18 NPT, but that's just a guess.
_________________________________________________________________
In a rush? Get real-time answers with Windows Live Messenger.
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_realtime_042008
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.