Re: 8 3/4 Differential Question

[chymar01@xxxxxxxxxxx]

behind the backing plate is supposed to have a steel gasket. the axle itself should have a foam one.

Mark
 -------------- Original message ----------------------
From: "Dennis C." <dennis.2914@xxxxxxxxx>
> 
> Hello,
> I found a 1965 8 3/4 differential for my63 SF.  I have it apart for new 
> gaskets, seals and wheel bearings before installing itin the car.
> 
> When I disassembled it I found only foam gaskets between the axle tubes 
> and the brake backing plates.  The only drawing I have shows that this 
> should be an embossed steel gasket.  Should I be conderned and order the 
> steel gaskets or put foam gaskets back in?
> 
> I'm not doing anything with the center section except I replaced the 
> pinion seal.  It has an open 2.94 (per the stamped plate) in it that 
> when I have the money I'm changing to a sure grip.
> 
> Thanks 
> Dennis C.
> 
> 1996 Dodge Ram 3500 Van Conversion
> 1964 Plymouth Belvedere 318 Auto
> 1963 Plymouth Sport Fury 383 4-speed
> 1949 Dodge Pickup 289/C4 soon to be changed
> 1998 Honda Valkyrie Standard
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly 
> to that person.  I.e., send parts/car transactions and negotiations as well as 
> other personal messages only to the intended recipient, not to the Clubhouse 
> public address. This practice will protect your privacy, reduce the total volume 
> of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.