Re: molding removal

[Brian Safford <hzf9vv@xxxxxxxxx>]

My main problem is not wanting to pry hard enough to bend stuff :-(

The two small trim pieces that overlap the lower ones by the
headlights are impossible ... I have no idea how they come off.

I tried checking the website technical pages but the site seems to be
non-responsive today ...

Thanks for the tips,
Brian

On Tue, Jul 1, 2008 at 10:00 PM, Schuyler Wrobel <sky62@xxxxxxxxxxxxx> wrote:
>
> Brian, in one of the last chapters on 'Body and Sheet Metal'
> there should be a paragraph or two about the grill (removal/intsallation).
> I don't have my book in front of me, but as I recall the lower ss grill
> surround
> pieces, there's a small square piece in the center, held on by a nut, you
> can get to
> from behind. some of the push-on clips you can get to from behind also.
> a stiff bladed putty knife and a rag or piece of wood to pry on may help.
>
> hope this helps or maybe you figured it out already...
>
> Schuyler
> 62 Dodge Dart 440 wagon w/ Poly 318
>  <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
> FYI - I Do the Decal designs for the Poly head 318 and more! email me with
> your needs -
>  <sky62@xxxxxxxxxxxxx>
>
>
>
> On Jul 1, 2008, at 6:26 AM, Brian Safford wrote:
>
>> How the heck do you remove molding on a 62 Dart 440?  I'm trying to
>> remove the grill so I have better access to install my electric fan.
>> I have the service manual and it doesn't have anything about molding
>> removal.
>>
>> Apologies if this info is on the website - I'll go check there now :-)
>>
>> Regards,
>> Brian Safford
>> '62 Dart 440
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.