|
Thanks, Dick. Jim caught my mistake on the last number of the
grommet. It is the same number on my 1968 valve cover's original, but
brittle grommet.
I'm ordering two grommets from Jim, plus a N.O.R.S.
valve. As I noted in my e-mails to both of you, I'm concerned about having the
right type of PCV valve due to the possible consequences of installing a
correct appearing part that doesn't have the proper "flow characteristics." As I
noted to you off list, the wrong PCV valve can cause all sorts of nasty oil
leaks due to pressure building up in the crank case.
Thanks again.
K.
----- Original Message -----
Sent: Tuesday, February 01, 2005 9:58
PM
Subject: RE: PCV valve cover grommet Part
Number
Ken, the part number
is 2536 926, probably the same for 68, but no
guarantee!
The PCV valve
itself is 2808 622, and this valve is used on all Mopars in 1967, probably for
many other years also, 62 and up (61 in CA).
I?ve taken the
liberty of posting this to the rest of the group also, as there has been some
discussion of these parts lately.
Dick
Benjamin
From: Ken
& Tracie [mailto:ktjosephson@xxxxxxxxxxxxx]
Sent: Tuesday, February 01, 2005 5:03
PM
To: Dick
Benjamin
Subject: PCV Part
Number
Would you have a '68 parts manual? I need the part
number for my 440's PCV valve.
|
