Re: IML: PCV or vent tube

["jsadowski" <jsadowski@xxxxxxx>]

Replacement carbs often have many extra ports that will go unused. Plugging 
the one intended for the PCV will have no affect on anything.
John
----- Original Message ----- 
From: "Klebert L. Hall" <swampyankee@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, February 04, 2005 5:35 PM
Subject: Re: IML: PCV or vent tube


> >Subject: IML: PCV or down pipe?
> > From: "bom tie" <bomtie@xxxxxxxxxx>
> >
> > My had the orginal down pipe and carb. I, not
> > knowing any better thought that a new eledbrock
> > carb on the car would help it run better. Well that
> > sucker is setup for PCV. Do I get rid of the downpipe
> > OR plug up the hole on the carb? Will it make any difference?
>
>   I'm pretty sure you can just put a little rubber cap over the vacuum 
> port
> on the carb.
>      -Kle.
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm