Although this is the last thing to check, I think that a bad signal switch can cause loss of brake lights. Don't ask why. If nothing else works, you will need to replace that signal switch in the steering column. D^2 Quoting "C. Wilhelm" <ldangel987@xxxxxxxxxxx>: > Hey peoples... > > So tonight I discovered my brake lights are not functioning, and I am at a > total loss as to why. > > Problem: I press the brake, and I have no brake-lights. > > 1. I replaced the stop-light switch a few hours ago. > 2. I replaced the fuse and checked all others. > 3. I checked the wiring and cleaned terminals. > 4. I checked/replaced all brake light bulbs. > > Result: Still no brake-lights. > > Notes: > 1. All regular rear lights work when the headlights or parking lights are > on. > 2. Left and Right turn signals function correctly on both front and rear. > 3. Hazard signals ONLY function in the front! The rear ones do not flash. > > Request: > > Please provide me with some insight as to what I am missing here. I have > checked everything I can think of. The only thing I am not sure about is if > the "Sentinel" system could have something to do with it, somehow... > > Thanks, > Cliff > > > > > ----------------- http://www.imperialclub.com ----------------- > This message was sent to you by the Imperial Mailing List. Please > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be > shared with everyone. Private messages (and attachments) for the > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm > > ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm