yes this is true. the guy's at carquest told me that to . if oxydation had soaked deep enough into the plastic . no amount af polish or elbo grease will remove it.
Dick Benjamin <dickb@xxxxxxxxx> wrote:
Yes, if the fogging is a surface problem. If it is throughout the plastic,
the polish isn't going to help much.
Dick
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of W.Roddick
Sent: Wednesday, February 23, 2005 9:09 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: RE: IML: Polishing plastic Was: '66 Imperial Tail Lens
Will that work on fogging plastic headlight lenses too?
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Dick Benjamin
Sent: Wednesday, February 23, 2005 8:52 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Polishing plastic Was: '66 Imperial Tail Lens
Meguire's makes a plastic polish (I believe it is #9) that is
fantastic!....
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network