Re: IML: 1990 Imperial? Master Cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 1990 Imperial? Master Cylinder



the Bendix system has (should have) a lifetime recall.  Get it
replaced ASAP at a dealer with a working Bosch system.  I say should
have, because I don't know if there was any warranty voidage with your
work and the damage, but those systems are NOTORIOUS for failure, and
there's no reason to go to a standard brake system with the lifetime
recall, imo.  If you do have to get new parts, and want to convert to
standard non-abs brakes, look no further than a Dodge Dynasty in your
local bone-yard...

-Jason

On Apr 5, 2005 8:43 PM, Brad Hogg <luxoliner@xxxxxxx> wrote:
> IMO, it's too bad you bought that expensive master cylinder rather than
> converting the system to standard power brakes.
> 
> ----- Original Message -----
> From: <alacaria@xxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, April 05, 2005 10:13 PM
> Subject: Re: IML: 1990 Imperial? Master Cylinder
> 
> Brad;
> 
> Thanks, according it is a Bendix system. The date of manufacturer of the
> car is 5/90
> 
> At 08:43 PM 4/5/2005 -0500, you wrote:
> >Is this the ABS system?  If so, Bosch or Bendix?  You may be looking at
> >salvage yards for that part.
> >
> >This picture shows the Bendix system.
> >
> >http://www.nybclub.org/membercars/bradhogg/90Imperial/Repairs/ABSRetrofit/i
> magepages/image2.html
> >
> >----- Original Message -----
> >From: <alacaria@xxxxxxxxx>
> >To: <mailing-list@xxxxxxxxxxxxxxxx>
> >Sent: Tuesday, April 05, 2005 7:29 PM
> >Subject: IML: 1990 Imperial? Master Cylinder
> >
> >
> >
> > >Guys;
> >
> >
> >I have a problem. My son has a 1990 Chrysler Imperial Mark Cross Edition
> >which he loves. I just replaced his front rotors and brake pads and
> >adjusted his emergency brake. I do not know how his brakes worked before as
> >I did not drive it. But after replacing everything above I came to find out
> >that he did not have much brake pedal. So I went and purchased a new master
> >cylinder and when I went to put it on, I guess I was into too big of a
> >hurry and damaged the reservoir. What I did find is that the Imperial has
> >one large combined hydraulic unit with a three filler reservoir on the top.
> >My question is this, does anyone know where I can find a reservoir for this
> >unit? Also all the parts stores do not show this unit on a 1990 or 1991
> >Imperial.
> >
> >
> >Any ideas
> 
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> 
>


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.