Re: IML: 1990 Imperial? Master Cylinder

["FREDERIC GIGNAC" <fredericgignac@xxxxxxxxxxx>]

hello, about your problem on bendix abs system, please call the nearest 
chrysler dealer because some models of this abs system are limited lifetime 
warranty. and in 1990's the cars was covered by manufacturer recall for 
safety. i hope this informations are good for you.
n.b. if dealer is not cooperate with you send me a message with your serial 
number, i m working in chrysler dealership in canada and it was so possible 
for me to help you.
       greetings... frederic gignac (fredericgignac@xxxxxxxxxxx)

> From: Brad Hogg <luxoliner@xxxxxxx>
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: Re: IML: 1990 Imperial? Master Cylinder
> Date: Tue, 05 Apr 2005 22:43:32 -0500
>
> IMO, it's too bad you bought that expensive master cylinder rather than
> converting the system to standard power brakes.
>
> ----- Original Message -----
> From: <alacaria@xxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, April 05, 2005 10:13 PM
> Subject: Re: IML: 1990 Imperial? Master Cylinder
>
>
> Brad;
>
>
> Thanks, according it is a Bendix system. The date of manufacturer of the
> car is 5/90
>
>
>
>
> At 08:43 PM 4/5/2005 -0500, you wrote:
> >Is this the ABS system?  If so, Bosch or Bendix?  You may be looking at
> >salvage yards for that part.
> >
> >This picture shows the Bendix system.
> >
> >http://www.nybclub.org/membercars/bradhogg/90Imperial/Repairs/ABSRetrofit/i
> magepages/image2.html
> >
> >----- Original Message -----
> >From: <alacaria@xxxxxxxxx>
> >To: <mailing-list@xxxxxxxxxxxxxxxx>
> >Sent: Tuesday, April 05, 2005 7:29 PM
> >Subject: IML: 1990 Imperial? Master Cylinder
> >
> >
> >
> > >Guys;
> >
> >
> >I have a problem. My son has a 1990 Chrysler Imperial Mark Cross Edition
> >which he loves. I just replaced his front rotors and brake pads and
> >adjusted his emergency brake. I do not know how his brakes worked before 
> as
> >I did not drive it. But after replacing everything above I came to find 
> out
> >that he did not have much brake pedal. So I went and purchased a new 
> master
> >cylinder and when I went to put it on, I guess I was into too big of a
> >hurry and damaged the reservoir. What I did find is that the Imperial has
> >one large combined hydraulic unit with a three filler reservoir on the 
> top.
> >My question is this, does anyone know where I can find a reservoir for 
> this
> >unit? Also all the parts stores do not show this unit on a 1990 or 1991
> >Imperial.
> >
> >
> >Any ideas
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm