Re: IML: Where to get new brake lines for a '64?

["Frederick Joslin" <fljoslin@xxxxxxxx>]

A little more difficult, but not much is to get a coil of brake line and put the fittings and flares on yourself. You could probably do the entire car for about $30. Making the double flare fittings is not very difficult once you have done a few of them. Just make sure to put the screw-on connector on before you make the flare or you will be cutting it off and doing it again and hopefully the line will be long enough.

----- Original Message -----
From: mopar413@xxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: Where to get new brake lines for a '64?
Date: Mon, 28 Nov 2005 22:15:17 -0500


Why don't you go to the NAPA store and buy
brake lines and bend them your self. A lot
cheaper and not hard to do. Buy a tubing
bender. Just a small one will do it. THat is
what I ha ve done and works just fine.
>
> From: Rob Goodyear
> Date: 2005/11/28 Mon PM 08:59:52 EST
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: IML: Where to get new brake lines for a '64?
>
> My '64 coupe is in need of new brake lines. I have
> called Classictube and Inline. Both companies do not
> have patterns for the '64-66 generation but can
> replicate using the original lines. Can anyone
> recommend another vendor?
>
> Thanks.
>
>
>
>
> __________________________________ Yahoo!
> Music Unlimited Access over 1 million songs.
> Try it free. http://music.yahoo.com/unlimited/
>
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial
> Mailing List. Please reply to
> mailing-list@xxxxxxxxxxxxxxxx and your
> response will be shared with everyone.
> Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>


----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

Fred Joslin