RE: IML: master cylinder top up

["Rob van der Es" <r.vdes@xxxxxxxxxxxxxxx>]

@ John: Sorry, Ernie came already up with the answer. Thanks Ernie!

Robert

Op Do, 27 april, 2006 5:38 am, schreef Ernie Stepney:
> Hi Ken:
> There is no easy way, but use a 7/16 open end wrench to remove the bolt
> (first clean off any dirt on the lid) then slide the cap to the rear to
> see the fluid level, you do not have to remove it completely. I use a cap
> off a rear axle oil container ( clean it thoroughly if it has been used)
> and a 8 inch length of 3/8" clear plastic tubing on the brake fluid bottle
> to allow easy filling and no mess. Top it up to about 1/4" from the top
> and reinstall the cap.
>
> Ernie and The Black Bitc_!!
>
>
> -----Original Message-----
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of kenneth
> chilton Sent: Wednesday, April 26, 2006 12:19 PM
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: IML: master cylinder top up
>
>
> hello america
>
> i9 need to check the brake fluid level in the master cylinder on our 57
> imperial , the difficuty is with the bellows resticting access  to the m/c
>  top . is there a way of compressing the bellows or a method of
> checking/topping up the m/c that i am unaware of .  i am a total novice at
>  these things but willing to learn
>
> thanks ken    uk
>
> _________________________________________________________________
> Be the first to hear what's new at MSN - sign up to our free
> newsletters! http://www.msn.co.uk/newsletters
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared
> with everyone. Private messages (and attachments) for the Administrators
> should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared
> with everyone. Private messages (and attachments) for the Administrators
> should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
>
>
>




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm