RE: IML: master cylinder top up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: master cylinder top up



Hi Ken:
There is no easy way, but use a 7/16 open end wrench to remove the bolt
(first clean off any dirt on the lid) then slide the cap to the rear to
see the fluid level, you do not have to remove it completely. I use a
cap off a rear axle oil container ( clean it thoroughly if it has been
used) and a 8 inch length of 3/8" clear plastic tubing on the brake
fluid bottle to allow easy filling and no mess. Top it up to about 1/4"
from the top and reinstall the cap.

Ernie and The Black Bitc_!!

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of kenneth
chilton
Sent: Wednesday, April 26, 2006 12:19 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: master cylinder top up 

hello america

i9 need to check the brake fluid level in the master cylinder on our 57 
imperial , the difficuty is with the bellows resticting access  to the
m/c 
top . is there a way of compressing the bellows or a method of 
checking/topping up the m/c that i am unaware of .  i am a total novice
at 
these things but willing to learn

thanks
ken    uk

_________________________________________________________________
Be the first to hear what's new at MSN - sign up to our free
newsletters! 
http://www.msn.co.uk/newsletters



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.