Re: IML: iml 60 brake light switch/fuse?/also.../sorted!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: iml 60 brake light switch/fuse?/also.../sorted!
- From: randalpark@xxxxxxx
- Date: Sat, 07 Jul 2007 11:25:02 -0400
You should keep a new switch in the glove box, even though they are
working again. It saves the time of looking for one later when it
finally does fail. The threads where it srecews into the M/C are the
critical part of this switch. If you can't get the correct one, a
coupler can be used that has the correct threads on the male end, and
the switch threads on the female end.
Paul W.
-----Original Message-----
From: stephen dilley <stephendilley@xxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Sat, 7 Jul 2007 2:47 am
Subject: Re: IML: iml 60 brake light switch/fuse?/also.../sorted!
on gathering members thoughts, i then went back to the switch under m/c
-applied 12v and ..
hey presto brake lights ! -)
the issue was that even though the female connector was showing 12v it
was not crossing to the male connector , this was due to the leaking
brake fluid creating a barrier between them.
i simply cleaned up the connectors and the switch and now my brake
lights work !
it was pure coincedence that the temp gauge was shorted at the same
time it was noted the brake lights were no longer working, throwing us
off scent.
many thanks to all of you, for bringing me back to where i started and
solving this mystery.
now to sort the gauges out..... ..... but not before i take her for a
spin on this a rare sunny warm day :-), shame i be off to work soon :-(
steve.
------------------------------------------------------------
From: "Steve B." <Imperial59@xxxxxxxxxxxxxxx>
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: <mailing-list@xxxxxxxxxxxxxxxx>
Subject: Re: IML: iml 60 brake light switch/fuse?/also...
Date: Fri, 6 Jul 2007 23:41:28 -0400
Steve needs to determine whether or not the stop lights will come
on when the two wires under the Master Cylinder are joined
together.
My understanding from previous e-mails is that he has 12v at the
master cylinder wiring and connecting the wires there does not cause
the brake lights to come on though I could have easily
misunderstood.
Steve B.
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Watch all 9 Live Earth concerts live on MSN - Click Here!
----------------- http://www.imperialclub.com ----------------- This
message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the Administrators
should be sent to iml.webmonster@xxxxxxxxx To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free
from AOL at AOL.com.
=0
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network