There are a couple of reports on how to do this posted on the IML site- have
you researched the 68 pages for this yet?
My method is to remove the plates from their panels, strip the existing
coating with paint remover or acetone, polish the brass with very fine steel
wool, being careful to use long straight strokes, clean off the metal with
"prep-sol" or another degreaser, and then spray with clear Krylon lacquer.
I redid my 68 brass about 5 years ago, and it still looks quite good, as you
can see on the Multiplex Stereo pages on the IML site.
Dick Benjamin
----- Original Message -----
From: <Billimp68@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, August 18, 2002 6:37 PM
Subject> It is now time to refurbish the antique bronze on my 1968 Crown
Coupe with
> the Mobile Director Option. Several months ago there was some information
on
> the list about doing this, but I would like more information from people
who
> recently did this work to find out the best way and the results that they
> obtained.
Back to the Home of the Forward Look Network