If it is a 55 imp rebuild kits are very hard if not to
find. The ring was not in the one I found after a very
long and hard search. RC
--- Dave & Tracy <dave-tracy.sherratt@xxxxxxxxxxxx>
wrote: > A couple of years ago I managed to get a
master
> cylinder R/B kit, the cap
> seal was not included in it.
> How ever when I was in Jacksonville I managed to get
> a proper one off
> Automobillia. They are very helpfull.
> Regards
> Dave60 Le Baron
> .
> ----- Original Message -----
> From: "Mark McDonald" <tomswift@xxxxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Sunday, May 18, 2003 4:52 AM
> Subject: Re: IML: Master Cylinder Cap Seal
>
>
> > Dear John & Shirley,
> >
> > I'm wondering where the seal went that was
> supposed to be there . . . and
> how
> > you had any brakes without it! It's been awhile
> since I redid a master
> > cylinder, but I'm pretty sure they sell rebuild
> kits that will contain a
> new
> > seal for you. Check your local parts store. (I
> don't think you will be
> able
> > to get just the seal itself; you'll probably have
> to buy the whole kit,
> but
> > they're not expensive.)
> >
> > Mark M
> >
> > John/Shirley Nimmo wrote:
> >
> > > Hi IMLer's;
> > >
> > > Have a question about the master cylinder cap
> seal. One day while
> driving my
> > > car I had to use the
> > > brakes very heavily several times and all of a
> sudden didn't have any
> > > brakes. After I got the car home
> > > I took the cap off and noticed that there wasn't
> any seal at all under
> the
> > > cap and all of the fluid
> > > had dripped down the side of the master
> cylinder. I made a seal for the
> cap
> > > and it works fairly
> > > well, but under hard braking this still leaks.
> Is there anybody who
> sells
> > > remanufactured seals
> > > for the master cylinder cap?
> > >
> > > Any information would be greatly appreciated..
> > >
> > >
> Sincerely,
> > >
> > >
> John & Shirley Nimmo
> > >
> >
> >
> >
Back to the Home of the Forward Look Network