Master Cylinder Cap Seal

["Dave & Tracy" <dave-tracy.sherratt@xxxxxxxxxxxx>]

A couple of years ago I managed to get a master cylinder R/B kit, the cap
seal was not included in it.
How ever when I was in Jacksonville I managed to get a proper one off
Automobillia. They are very helpfull.
Regards
Dave60 Le Baron
.
----- Original Message -----
From: "Mark McDonald" <tomswift@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, May 18, 2003 4:52 AM
Subject: Re: IML: Master Cylinder Cap Seal


> Dear John & Shirley,
>
> I'm wondering where the seal went that was supposed to be there . . . and
how
> you had any brakes without it!  It's been awhile since I redid a master
> cylinder, but I'm pretty sure they sell rebuild kits that will contain a
new
> seal for you.  Check your local parts store.  (I don't think you will be
able
> to get just the seal itself; you'll probably have to buy the whole kit,
but
> they're not expensive.)
>
> Mark M
>
> John/Shirley Nimmo wrote:
>
> > Hi IMLer's;
> >
> > Have a question about the master cylinder cap seal. One day while
driving my
> > car I had to use the
> > brakes very heavily several times and all of a sudden didn't have any
> > brakes. After I got the car home
> > I took the cap off and noticed that there wasn't any seal at all under
the
> > cap and all of the fluid
> > had dripped down the side of the master cylinder.  I made a seal for the
cap
> > and it works fairly
> > well, but under hard braking this still leaks. Is there anybody who
sells
> > remanufactured seals
> > for the master cylinder cap?
> >
> > Any information would be greatly appreciated..
> >
> >                                                              Sincerely,
> >
> >                                                   John & Shirley Nimmo
> >
>
>
>