403 radio valve

["A. Foster" <monkeypuzzle1@xxxxxxx>]

Dave;
 If you pass on the valve (tube) numbers for that radio I can give you their
European equivailents. I think that the model 403 is the MoPar part number,
the set was likely manufactured by either Philco, Motorola, or Bendix
depending upon the year. What year of Imperial was your car again?
Best Regards
Arran Foster
1954 Imperial Newport
Needing A Left Side Tailight Bezzel and other trim parts.
----- Original Message ----- 
From: "Dick Benjamin" <dickb@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, November 25, 2003 3:26 PM
Subject: Re: IML: 403 radio valve


Most push into a socket.  Tell me the tube number and I can tell you for
sure.  What does the '403' refer to?

Dick Benjamin
----- Original Message ----- 
From: "Dave & Tracy" <dave-tracy.sherratt@xxxxxxxxxxxx>
To: <L-ForwardLook@xxxxxxxxxxxxx>; <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, November 25, 2003 11:44 AM
Subject: IML: 403 radio valve


Hi is a radio valve a push in fit or is it soldered, direct to the mother
board.
Thanks
Dave.