Two 75 Imperial Questions -- Vinyl Top Removal and Cam Profile

["B & T Roddick" <1roscoe@xxxxxxxxxxxxx>]

Nice job, Elijah!




----- Original Message ----- 
From: "Elijah Scott" <imperial1971@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, February 04, 2004 5:34 PM
Subject: IML: Two 75 Imperial Questions -- Vinyl Top Removal and Cam Profile
>
> Henry -- when I rebuilt the 440 in my '71 Imperial a
> few years ago, I used a Competition Cam #21-213-4.
> You can see the complete specs for this cam toward the
> bottom of the page at
> http://www.imperialclub.com/Yr/1971/Scott/Engine/.
> I've been really pleased with the results -- better
> low end torque, slightly improved mpg, and a nice
> smoth idle with just a hint of a rumble to it.
>
> Also be sure to have a crossover or "H" pipe welded in
> to the dual exhaust system (preferably as close to the
> engine as possible).  This will make a noticeable
> improvement in low end torque.
>
> Good luck!
>
> Elijah
> 1965 Imperial LeBaron
> 1970 Imperial LeBaron
> 1971 Imperial LeBaron

> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>