Re: [Chrysler300] 300L Tranny Cables

[Mike Apfelbeck <moparmike@xxxx>]

Steve,
I know you guys just adjusted the throttle ( kickdown ) linkage but it 
still sounds like the problem. Check it again and verify that it is 
returning to idle position on its own and not binding up or sticking. 
Problems with the gear shift cable usually manifest themselves as slipping 
and poor shifting, due to insufficient oil pressure, from the manual valve 
not being properly positioned.

Mike

At 09:02 AM 3/11/2003 -0500, Steve Galezowski wrote:
> Joe:
>
> I know there is linkage for the kickdown which we have adjusted but the
> problem recurs (more below). I was told by my mechanic there is also a cable
> (presumably between the linkage and the pedal) which could be the source of
> the problem. Does that make sense to you? Specifically, what happens is 1.
> downshifting to second when it shouldn't and 2. not upshifting to third when
> it should. Also, it does not seem to behave consistently the same way.