Re: [Chrysler300] crankshaft
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] crankshaft



Bob;  ALL  '55 thru '65 letter car cranks are hardened and take the tri-metal bearings. AND, all 300 engines are balanced to +- 2 grams at the factory. N.Y, & Imp. are only balanced to as much as 30 grams. All hi perf engines are balalanced to the minimum, that takes in the 361s, 383s, etc and many of the "A' block engines. That is for the higher RPMs. 
George



  ----- Original Message ----- 
  From: Bob Jasinski 
  To: chrysler300@xxxxxxxxxxxxxxx 
  Sent: Tuesday, December 18, 2007 8:34 PM
  Subject: RE: [Chrysler300] crankshaft


  George,

  What years of letter car crankshafts would this be true for, in addition to
  the '55 300s, if you know please? In particular the 300F and G engines.

  Bob J

  _____ 

  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
  Behalf Of George Riehl
  Sent: Tuesday, December 18, 2007 4:10 PM
  To: 'Jonnie'; chrysler300@xxxxxxxxxxxxxxx; Rich Barber
  Subject: Re: [Chrysler300] crankshaft

  Rich; Just had this discussion with a Club member.........both cranks are
  forged.......300, marine and industrial crank bearing journals are flame
  hardened to .060, New Yorkers and Imperials are not hardened. Other than
  that, both are the same in dimentions and interchangeable. Tri-metal bearing
  used on hard cranks, Non tri-metal bearings used on the others.
  George Riehl

  ----- Original Message ----- 
  From: Rich Barber 
  To: 'Jonnie' ; chrysler300@ <mailto:chrysler300%40yahoogroups.com>
  yahoogroups.com 
  Sent: Tuesday, December 18, 2007 4:32 PM
  Subject: RE: [Chrysler300] crankshaft

  Just curious. Is there any difference between a 1955 C-300 crank and one
  from a NY or Imp? 

  C-300'ly,
  Rich Barber
  Brentwood, CA
  1955 C-300 

  -----Original Message-----
  From: Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
  [mailto:Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com]
  On
  Behalf Of Jonnie
  Sent: Tuesday, December 18, 2007 1:12 PM
  To: chrysler300@ <mailto:chrysler300%40yahoogroups.com> yahoogroups.com
  Subject: [Chrysler300] crankshaft

  Does anyone out there have a 55 C300 crankshaft they would like to sell
  ?-----Johnnie Slayton

  [Non-text portions of this message have been removed]

  To send a message to this group, send an email to:
  Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com

  For list server instructions, go to
  http://www.chrysler <http://www.chrysler300club.com/yahoolist/inst.htm>
  300club.com/yahoolist/inst.htm

  For archives go to http://www.forwardl
  <http://www.forwardlook.net/300-archive/> ook.net/300-archive/ 
  Yahoo! Groups Links

  [Non-text portions of this message have been removed]

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.