RE: {Chrysler 300} Lubrication of tach drive distributor

["Bob Jasinski" <rpjasin@xxxxxxxxxxx>]

Thanks Bob!  So just fill the cap, and thread it in a bit every few years.  This is a new one on me, too good to not share with the list.

 

Bob J

 

From: Bob Merritt <bob@xxxxxxxxxxxxx>
Sent: Tuesday, May 7, 2024 3:21 AM
To: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Subject: Re: {Chrysler 300} Lubrication of tach drive distributor

 

Hi Bob;

Fill the cap full of grease, screw it in and as you go it

forces the grease in. Every so often (maybe once in 2 years)

turn the cap a little more and force more grease in.

Bob

 

On 5/6/2024 11:26 PM, Bob Jasinski wrote:

What is the procedure to lube a tach drive distributor?  Mine was rebuilt years ago and I haven’t lubed it since.  When I remove the lube cap, all I see is grease inside.  Is there a special lube tip used to force new grease in?  Manuals aren’t much help.

 

Bob J

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/080d01daa02e%246a7f5340%243f7df9c0%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/086e01daa08f%24477af960%24d670ec20%24%40comcast.net.