Re: clutch type
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: clutch type



Working on it (more hp and torque)!

  Akron Don




________________________________
From: Herb <zephyr9900@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Fri, February 5, 2010 6:31:57 PM
Subject: Re: clutch type



Sounds like all you needed was more HP & Torque to offset the bog!  (;

          
Herb 

1956 Plymouth Belvedere 361
1959 Coronet 326 Poly
1963 Fury 2D/HT 6.1
1963 Sport Fury Convertible 361
1970 Challenger RT 440 - 4 Sale
1999 Durango SLT 5.9
2008 SRT-8 Magnum 6.1
St. Louis, MO.

http://1962to1965mopar.ornocar.com/mmo42009.html 
  



-------Original Message-------

From: Donald Gallimore
Date: 2/5/2010 5:22:11 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: clutch type

I used 9" slicks at 16 psi in a 3800# car.  Had 4.10 gears.  Engine was 375
HP and about 450 ft# torque at the rear wheels (chassis dyno) so I think it
had the power to blow off a 9" slick.  Would hit 107-110 mph at the end of
the run and 12.80s.  Sixty foot at 1.8s.

Never figured out what was wrong.  I THINK the suspension worked too good
and slammed the tires into the pavement.  With everything locked up, the
weakest point broke.  Fixed all that then I got a bog off the line when it
pulled the engine down.

    Akron Don



________________________________
From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Fri, February 5, 2010 5:37:58 PM
Subject: Re: clutch type


Don and Steve-- Now you gave me another reason to not be able to go to
sleep! :-) What kind of hores are you making to have those kinds of breakage
problems? And how big the slicks or ties? I doubt I would try the sidestep
method...............................MO
----- Original Message ----- From: "Steven Charette"
<stevec@xxxxxxxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, February 05, 2010 4:00 PM
Subject: RE: clutch type


>
> I don't want to dampen Merwin's enthusiasm, 4 speeds are a blast.  If I
were
> going to use one in a driver, I'd make sure the tires act as a "fuse" and
> take the load off the drivetrain.  If you sidestep the clutch, let it spin
a
> little.
>
> Big difference in torque between a 426 wedge and a 289.
>
> Pushbutton Steve :P
>
> -----Original Message-----
> From: Donald Gallimore [mailto:dongallimore@xxxxxxx]
> Sent: Friday, February 05, 2010 3:54 PM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: clutch type
>
>
> I was thinking about that breakage when I wrote the response.  Probably
> spent $5,000 on fixing destroyed drivetrain stuff.  Then I got a good Dana
> 60 and I was still having starting line launch issues.  Now I run a TF and
> go end to end every pass down the track.
>
> I used a 10 1/2 inch unit.
>
>  Don
>
>
>
>
> ________________________________
> From: Steven Charette <stevec@xxxxxxxxxxxxxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Fri, February 5, 2010 2:31:19 PM
> Subject: RE: clutch type
>
>
> Yeah, and then he broke every part on the car except the glove box door.
:P
>
> 4 speeds = fun to cruise but hard on parts.
>
> AFAIK there are two varieties of clutch (Don will know more about this),
the
> 10 1/2" and the 11".  Seems like the 10 1/2" had an aluminum bellhousing
> while the 11 was iron?  As long as you keep everything matched I think
> you're good.  IIRC (kids are rubbing off on me) not all crankshafts are
> machined for throw-out bearings - Don, can you verify?
>
> SC
>
> -----Original Message-----
> From: Donald Gallimore [mailto:dongallimore@xxxxxxx]
> Sent: Friday, February 05, 2010 1:54 PM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: clutch type
>
>
> I used the Centerforce Dual Friction Clutch in my 440 powered '65
Belvedere.
> Held up very well and leg effort was not bad at all.
>
>  Akron Don
>
>
>
>
> ________________________________
> From: Merwin Wrisley <vulcan@xxxxxxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Fri, February 5, 2010 1:40:27 PM
> Subject: clutch type
>
>
>
>    Having never changed a clutch in a Mopar (plenty of experience in mid
> 60's Mustangs, though). Is there a choice in pressure plates, either Beck,
> Long, G.M.style, and what would you recommend for my '65 383, (soon to be
a
> wedge 426) Coronet ? Also, will I need a different
> flywheel for the '26? I'm wondering about a balance issue.  Merwin
>
>
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
>
>
> ----
> Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www
1962to1965mopar.ornocar.com/general_disclaimer.html.
>
>
>


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www
1962to1965mopar.ornocar.com/general_disclaimer.html.


[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.