Door Alignment

[Butch Edison <waedison1@xxxxxxxxxxx>]

I sent my door hinges out to be refurbished. When I get them back, I'll 
need to install them and adjust the doors for looks and ease of use. It 
looks to me like the best way to reinstall the hinges is to put them on 
the car first, then the doors. Sound right? I figure on loosening the 
door latching mechanism on the car, get the door looking right in the 
hole, then start tightening the hinge and door hardware, testing as I 
go. 

While this all sounds reasonable to me, I've never done this before, so 
would appreciate any advice I can get from those of you who have.

Thanks/Butch/ Ferndale, WA

Mopar...if you have to ask, you'll never understand.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.